The Microflow is used for blowing in small fibre optic cable 1- 5 mm. With the Microflow cable blowing is fully automated and operated by touch screen. The continuously variable operation speed and the maximum speed are preselectable. A micro sensor supervises the linear course of the fibre optic. A lateral swivel out due to the rising friction or obstacles will cause an immediate stop and the cable gets moved backwards.
|max. speed:||100 m/min|
|required air flow:||1 m³/min|
|required air pressure:||15 bar|
|required electric power supply::||230 V|
The Microflow Log is for the same application like the Touch. But it is operated via a newly developed unit, which enables the issue of a protocol in accordance with the regulations of Deutsche Telekom. The log data can be transmitted via W-LAN or via mobile communications from the construction site to the client or the office.
This is a complete set of format parts consisting of nylon fibre guide, wheels, top blowing junction block, bottom blowing junction block, fibre cable sensor arm and o-rings for the wheels. The Adaption set is available in different sizes and must be used according to the actual size of fibre cable and micro duct. Please specify the size of the fibre cable and micro duct.
The applicator leads the cable into the Microflow. It is available in different sizes according to the actual size of the fiber cable.
Der Microflow ist mit zwei Rädern ausgestattet, die das Kabel in das Einblasgerät ziehen. DIe Räder sind in verschiedenen Größen erhältlich, entsprechend der Größe des Kabels.
Fibre cable sensor arm
The fibre cable sensor arm is the unique protection technology of our Microflow. It stops the cable blowing machine as soon as the cable gets bent inside the blowing junction block and the cable cannot get damaged. The sensor arm is available in different sizes according to the actual size of the fibre cable.
O-Ring for wheel
It is available indifferent sizes according to he size of the wheel/cable.